
Thank you for downloading the update for FsQC.

Version update 7.74

Improvements 7.74
*********************
*********************

New feature added: a missing aircraft image in the main form can now be easily added from the Aircraft Profile form
The info buttons in the Aircraft Profile are now updated to help you better understand some fields. It is recommended to read the info thoroughly.
Added low fuel penalty upon landing.
Landing Chart updated: runway name now shown at the bottom. It can now no longer be overwritten.
Removed all ICAO codes that have no runways (this sometimes caused problems, though very rare).
In the form statistics added 'Performance previous 10 flights' and you can adjust the number.
Traffic functions have been disabled for both MSFS2020 and MSFS2024, as they are non-functional.
Reported issue with fuel in FS2004 is solved. 

replace and/or copy the files to your FsQC folder.

*********************



New file added from version 7.36: 'AirportNames.sqlite' copy the file to your FsQC folder.(only for FS2020)


************************************************************************
After the new update (october 2022 FS2020) the makerwys.exe file doesn't copy the names of airports and cities anymore.
A new file is added 'AirportNames.sqlite' with the names, to put the names back in runways.xml file: go to 'menubar settings/options and failures' and click the build button.
The original runways.xml file will be renamed to: runways.xml.orginal, just in case.
Few names are still missing.
************************************************************************



If you have already v7.26 or higher you don't have to replace the 'failuresettings.ini' file.
If you not sure replace also the 'failuresettings.ini' file.

If you have already v7.31 or higher replace only the exe file.


************************************************************************
************
************

Don't forget to run the MakeRwys.exe file after any kind of Flight Sim update! and go to 'Menubar settings/options and failures' and click the build (only for MSFS2020) button.
Also copy the new generated files: runways.xml, t5.csv, g5.csv, r5.csv, f4.csv and f4x.csv to your FsQC folder

************
************
************************************************************************



XXXXXXXXXXXXXX
******************If window layout or PDF report of FsQC is weird set the scaling to 100% (DPI) in windows settings.
******************In Windows 10 or 11 change the DPI settings in the property off FsQC execute file: Compatibility, Change the DPI settings, Check override high DPI
XXXXXXXXXXXXXX


Known issues:

Addon aircrafts can have issues, if so please send an email to support@fsqc.eu.
Loading a flight in FsQC not working in FS2020.
Reload flight plan not working in MSFS2020
Set Traffic not work in FS2020.
Wheather info not working in FS9, P3D and FS2020.


Please send an email to support@fsqc.eu if you find a bug or you have a problem.


***********************************************************************************





Improvements 7.73

Added new additional feature in Aircraft Profile
Some bugs in Flight Debrief solved



Improvements 7.72

Added new feature: Aircraft Profiles for the Flight Debrief, you can now set the penalties for each aircraft



Improvements 7.71

Gear Down sometimes not detected is solved.
Double Gear Up too late in Pilot Debrief is solved.
Incorrect message Touch & Go is solved.
False Strobe Light remark at takeoff in Flight Debrief is solved


Improvements 7.70

Added average flight performance in statistics.
Optimized QNH Altimeter Settings – Improved accuracy for takeoff, cruise, and landing phases.
Upgraded Flight Debrief – More robust failure detection to better assess pilot performance.


Improvements 7.69

New Feature: Added an additional column 'Flight Performance' in the logbook.
Bug Fix: Resolved database locking issues in the "Alter Logbook" function.
Improvement: Optimized aircraft thumbnail picture detection.
General Enhancements: Compatibility and performance upgrades for Flight Simulator MSFS 2024.


Replace and/or copy the files to your FsQC folder
Copy the .exe file to the FsQC folder
If sound folder not exist: Copy the sound folder to the FsQC folder
If t5.csv not exist: Copy the t5.csv file (from Makerwys.exe) to the FsQC folder
To adjust the volume for callouts: start FsQC, open the volume mixer and look for FsQC
If you dont want some sounds to hear change the name of the sound file, example: stby.wav to stby.off



Improvements 7.68

Takeoff Chart
Fixed an issue where the runway could not always be detected.

Landing Chart
Improved accuracy and reliability.

Bug Fixes
Resolved an issue where landing gear retraction was not being detected.

General improvements for MSFS 2024.



Improvements 7.67

Takeoff Chart (Horizontal View)
Adjusted runway position further to the right for better view.

Landing Chart (Vertical View)
Modified pitch line near V-speed reference for improved clarity.

Runway Selection Logic
Fixed issue where landing on the incorrect runway did not trigger a proper check.
System now detects the correct runway and regenerates the landing chart accordingly.

Pilot Debrief Corrections
Light Status: Fixed incorrect "Landing and Strobe Lights" message post-landing.
Spoilers: Resolved erroneous "Spoilers Not Retracted" warning when spoilers were properly stowed or not deployed.

Replace and/or copy the files to your FsQC folder
Copy the .exe file to the FsQC folder
If sound folder not exist: Copy the sound folder to the FsQC folder
If t5.csv not exist: Copy the t5.csv file (from Makerwys.exe) to the FsQC folder
To adjust the volume for callouts: start FsQC, open the volume mixer and look for FsQC
Improvements 7.66

Runway Width Issue Resolved: The incorrect runway width displayed in the Takeoff Chart has been fixed.
Takeoff Chart After Teleport Fixed: The issue causing the takeoff chart to malfunction after teleporting the aircraft has been resolved.
Taxi-In Lights Corrected: The lighting system during Taxi-In operations is now functioning properly.

Replace and/or copy the files to your FsQC folder
Copy the .exe file to the FsQC folder
If sound folder not exist: Copy the sound folder to the FsQC folder
If t5.csv not exist: Copy the t5.csv file (from Makerwys.exe) to the FsQC folder
To adjust the volume for callouts: start FsQC, open the volume mixer and look for FsQC
If you dont want some files to hear change the name of the sound file, example: stby.wav to stby.off


Improvements 7.65

Bug in v7.64: FS2004 landing analysis stopped to soon and Taxi In was not recorded, is now solved.
replace and/or copy the files to your FsQC folder
Copy the .exe file to the FsQC folder
If sound folder not exist: Copy the sound folder to the FsQC folder
If t5.csv not exist: Copy the t5.csv file (from Makerwys.exe) to the FsQC folder
To adjust the volume for callouts: start FsQC, open the volume mixer and look for FsQC
If you dont want some files to hear change the name of the sound file, example: stby.wav to stby.off


Improvements 7.64

Added RAAS and also Taxi- and other Callouts see Flight Analysis form.
For the moment RAAS only on ground.
TakeOff Chart improved

replace and/or copy the files to your FsQC folder
Copy the .exe file to the FsQC folder
Copy the sound folder to the FsQC folder
Copy the t5.csv file (from Makerwys.exe) to the FsQC folder
To adjust the volume start FsQC, open the volume mixer and look for FsQC
If you dont want some files to hear change the name of the sound file, example: stby.wav to stby.off


Improvements 7.63

Flight Debrief is improved
Random flightplanner is improved


Improvements 7.62

Flight Debrief is improved
Minimum takeoff thrust setting in takeoff is now 25%


Improvements 7.61

Flight Debrief is improved
Two additional buttons added in Flight Analysis:
info about TakeOff and Landing
Info about Pilot Debrief


Improvements 7.60

Added an aditional page in de pdf Flight Report: Flight Debrief.
The report is now generated when Beacon Lights are off and Engines shutdown, see menu settings/options.
When you dont make a flightplan a flightplan will be automatically generated by FsQC when start to taxi.
FlyByWire airbus 320 is now supported (through Lvars) you wil need the wasm module in FSUIPC, see documantation in FSUIPC.


Improvements 7.59

Loading Flight Plan in FsQC when simulator MSFS2020 is in Main Menu has a bug, is now solved.
You can not load a plan when FS2020 is not fully loaded beause when loading is finished the flightplan will be deleted by MSFS2020.
You can load the flight plan when MSFS2020 is in Main Menu.
TakeOff Chart improved, now the lines are more smooth.
TakeOff Roll maximum deviation is now correct.
Button Flight Analysis now respond after flight is finished.
When Click Flight Chart in taskbar now auto refresh.


 


Improvements 7.58


Added gates in Airport Info.
Gates also visible in Google Earth.
Added teleport Aircraft to gate.
Flight chart has now also a magenta box for the takeoff chart.
Takeoff chart also available in Logbook: double click cell RW Length.
PDF report changed, METAR destination moved to page with landing chart.
  




Improvements 7.57


TakeOffRunway in v7.56 has wrong name, is now fixed.
In Airport Info quick access button SimBrief added.
Added Auto start Google Earth in Flight Chart.
When METAR is not available shows now nearest weather station.
Visibility in FS2004 Flight Chart now fixed and in PDF report TakeOff and Landing
Loading Flight Chart (from Logbook) in v7.56 was slightly slower, is now faster.





Improvements 7.56


When you start FsQC and Sim is not loaded or FSUIPC is not loaded, airports will be now loaded. (the runways.xml file should be in the FsQC folder)
So you can quickly look in Logbook and Flight Analysis without Sim is loaded.
Live METAR weather added in Airport Information and PDF report.
Live weather must be enabled in the Sim. If this is disabled, it will not match the PDF report.
Also added in Airport Info quick access buttons to Websites such as SimBrief and SkyVector. 
Follow Aircraft in Google Earth, see Flight Chart to enable this.
Follow Aircraft in Google Earth in Flight Chart (from Logbook) with extended data: Ground- Air- and FlightPlan- Track.
The loading time is slightly longer, see the loading process in the bottom left corner 'Total Frames'.
Previous flights can also be seen in Google Earth. 




Improvements 7.55


Logbook and Flight Analysis improved:
Added choose Gallons, Lsb or kg for fuel.

Bug in v7.54 where your systems have commas before decimals has been fixed, affecting the Landing and Takeoff Chart.

Takeoff chart improved, sometimes couldn't find the runway.

Some (misspelled) text has been changed.




Improvements 7.54


Logbook improved:
Added 6 colors for the datagrid.
Added sorting dropdown by Rank or Alphabet.

Takeoff chart improved.
Landing chart improved.

Distance in logbook was distance from flight plan, now changed to flown distance.

Check if scale is 100% (DPI) at startup now also for win10.




Improvements 7.53


Logbook improved:
You can now alter the logbook.
You can transfer the flights from FS2020, P3D and FSX to FsQC logbook.
After the transfer you can easily and quickly delete the double flights.
Filter added.
Bug centerline roll deviation solved.

Statiscis improved:
Not only top 5 but visits but all visited airports, cities and countries.
Statistics now also accessible in main form in menubar.

Random destination in FlightPlanner improved:
Now show all airports from your query and you can choose one of them.





Improvements 7.52


Random destination in FlightPlanner improved:

Added maximum distance and maximum runway length
Added minimum and maximum airport elevation 
Choose whether Tower must be available
After the search it gives the number of airports found

Logbook more user friendly when deleting a flight, also when database is locked immediately show popup message.
Added Approach Type in PDF report.
Added ILS freq Runway when Glideslope was not detected.

Airport info has now more frequencies: copy the files f5x.csv and f5.csv to the FsQC folder
Added PAPI and VASI lights
Added Strobe lights




Improvements 7.51


TakeOff Chart improved, parallel runways better detected.
TakeOff Chart scale changed. (runways now a little bit longer)
QNH at cruise in pdf report improved.
QNH MS2020 not yet perfect. (bug in MSFS2020??)




Improvements 7.50


TakeOff Chart improved, some runways where not detected.
Bug in v 7.49 destination airport name, city and country solved.
Added QNH in Takeoff page pdf report




Improvements 7.49


TakeOff Chart improved, runways with high magnetic variatons where not detected.
Minor changes in layout windows.
Contradictions in Flight Chart with PDF report is solved or minimized




Improvements 7.48


Added TakeOff chart in Analysis and in PDF report




Improvements 7.47


Landing Horizontal Path issues in North directions Fixed
Added in Flight Chart choose to show Kilo meters instead of feet and Nm.
Changed Layout in Flight Analysis retracting Spoilers and Flaps now also in seconds after 1 minute
Recognise if reverser and spoilers are available in aircraft




Improvements 7.46


FS2004 fuel issue in v7.45 fixed
Fuel weight converting improved, must now be accurate
Added in Mainform fuel weight per Gallon (ie. Cessna fuel weight is different from Airbus)




Improvements 7.45


You can now choose in the settings menu for ending analysis with Engines Shutdown or Parking Brakes, default = Parking Brakes
Added Fuel Burn line in Flight Chart
Issue with Fuel Flow when started in the air and Push Back fixed
Changes in Flight Chart Layout, added 0% and 100% label for FuelBurn.
Issue finding gate and runway (width) file solved (g5.csv , r5.csv)
In Flight Report now added the Elevator(Trim), Aileron, FuelBurn and Fuel Flow line with labels.
Issue wrong values Fuel Burn: Galons, Kilograms and Liters in Flight Chart fixed




Improvements 7.44


Added Fuel Flow per Hour and Fuel Burn in Flight Chart, you can choose Gallons, Lbs, Kilograms or Liters
Engine started not detected after the pushback is solved
FS9 flightplan issue solved
Changes in Flight Report
Changes in Flight Chart Layout




Improvements 7.43


Gate Issue in FS9 solved
A message in Flight Analysis will appear when a file is missing
Waypoints improved (but can still have issues)
In Airport Info added Magnetic Variation
Some mispelled text is corrected




Improvements 7.42


Runway Width is now on scale (file r5.csv from MakeRunwys)
Runway in Horizontal Landing Path has now surface detection:
Hard: black
Grass: green
Water: blue
Clay, Mud, Dirt, Coral and Gravel: brown
Sand: light brown
Other: gray

Water runways: see  MakeRwys README file

Added in Flight Chart:
Elevator
Elevator Trim
Aileron

Gates added in Flight Analysis (file g5.csv from MakeRunwys)
Runway Width added in Airport Info (file r5.csv from MakeRunwys)
Put these files in the FsQC folder for faster access

Airport Info layout changed
Landing Analysis layout changed
Waypoints improved (but can have issues)
Starting engines checking now all engines, whichever comes first.
Shut engines: all engines must be shut

MSFS2020
When you make a flightplan in worldmap, it will be loaded in FsQC when Flight is Loaded and after clicking the Fly button (not the fly button in worldmap) 







Improvements 7.41



Waypoints had some issues 

Added additional Waypoints: Airports and Custom (POI)

TakeOff and Landing clearence are now visible in the Flight Chart (only 2020 and P3D)

Entering RW and Clearing RW are now visible in the Flight Chart (only 2020 and P3D)

6 Aircraft Lights are now also visible in the Flight Chart, When the position of one of the lights changes a panel of 6 lights will be drawn in the flight chart

Icao names departure and destination added with the runway names

Added Starting up and Shutting down engines in Flight Analysis (shut down only recorded when you shut down before the parking brakes set)

Some text are changed in flight analysis



 



Improvements 7.40



Added Waypoints in the Flight Chart from the flightplan and chosen Approaches.

Also the Outer- Middle- and Inner- markers.


 



Improvements 7.39



Starting up is now faster.

Checking for update now at the start. 




Improvements 7.38



Runways in North directions not always detected is solved.

Parallel Runways now better detected, sometimes the wrong RW was chosen.

Teleport aircraft improved.

Gallons below 10 will be written as 0.0 to 9.9. (useful for small aircrafts)

Changed some text and tooltips.

Some minor issues are solved.




Improvements 7.37


Added Landing Chart Horizontal path.

Landing Analysis has new window layout.

The landing is now better detectable.

Issue landing chart (v7.36) sometimes empty is solved.




Improvements v7.36


************************************************************************
After the new update (october 2022 FS2020) the makerwys.exe file doesn't copy the names of airports and cities anymore.
A new file is added 'AirportNames.sqlite' with the names, to put the names back in runways.xml file: go to 'settings/options and failures' and click the build button.
The original runways.xml file will be renamed to: runways.xml.orginal, just in case.
Few names are still missing.
************************************************************************

Now the landing will be recorded and can be played in in the sim for analyzing in the Flight Chart and Landing Chart, see the Flight Chart and Landing Analysis for more info.
Landing Anlysis is new so this work only with new flights.
The landing recorder will only be active when a landing is detected, and for now only the last landing (when you have missed or touch&go)
The recorded landing in real time playing is not possible at the moment, but works great with the scroll function.
New buttons are added in forms for faster access other forms.
Some bugs in flight planner are solved.
You can now also find POI in flight planner, you find them in the country names as POI.
Flight Chart is also improved, added runway names and some more stuff, extended flight time, and more info about the Flight Chart.
Issue missing approach and/or takeoff chart in pdf report is solved.
Also Starting up before sim is loaded is improved.
Less CPU usage.
Missed and touch&go are improved.
Frame rates sim added in few forms.
Flight Chart is refreshing automatically when you want to see it.
Some Issues in Nearest Traffic solved. In FS2020 not ground traffic yet.

Fully tested in FS2020 and FSX, but must also work fine with P3D and FS2004.





Improvements v7.35

Additional data in the Flight Chart.
Now you can see in MainForm if Simconnect is connected (only FS2020 & P3D).





Improvements v7.34

Vertical speed at touchdown
Pause when certain distance from destination is reached shows a message in the sim
Screenshots are now in jpg format
GPX files had altitude bug, is now fixed




Improvements v7.33

Taxiin gallons and Nm. now recorded
G-force at touchdown improved
added additional button for making the PDF Flight Report file
added additional possiblity for unpause the sim in MainForm




Improvements v7.32


All simulator versions:

Simconnect for FSX and FS9 not working yet, but you must copy the simconnect files for compatibility
P3D only version 4.5 is tested
Layout Main Form Window is changed

Logbook is updated, now with more info and columns
Logbook window optimized in full screen mode
Flight Chart Window optimized in full screen mode
Added centerline deviation on touchdown and landingroll

FSX landing chart issues in runway elevation in update v7.30 and v7.31 solved



Improvements v7.31


MSFS only:

Added Taxi Ribbons button
Tooltips now showing correctly
Nearest Traffic now show proper Aircraft Names
Payload give now also proper names voor every station

Don't forget to run the MakeRwys.exe file after an update of MSFS2020!


All versions:

Simconnect for FSX and FS9 not working yet, but you must copy the simconnect files for compatibility
P3D only version 4.5 is tested
Layout windows is changed
When the connection is lost with FsUIPC FsQC resets itself internally after reconnection, the result of this is that FsQC can't find the runway, this is now solved
Flight planner had isues with names that contains: /
Startup is Changed
Analysis had sometimes a premature start
Added maximum bounce height


Tip:

When you don't see the proper aircraft picure:

In FS9 or some AddOn Aircrafts you have to place a 'thumbnail.jpg' yourself
file in the texture folder of your favorite aircraft,
example in FS9 : Flight Simulator 9\Aircraft\b777_300\Texture\thumbnail.jpg.
example in FSX and P3D : Go to the FSX or P3D folder
SimObjects\Airplanes\B737_800\Texture\thumbnail.jpg.




****************

Improvements v7.30

Find now almost all addon aircrafts and liveries thumbnails
Better finding Runways with ILS and glideslope in the landingchart
Teleport Aircraft improved only MSFS2020
Simconnected added for MSFS2020
Simconnect for other Sims not working yet, but you must copy the simconnect files for compatibility




Improvements v7.29


You can now start FsQC when ever you want

Add some more info in analysis

When taxiing after landing the landing chart stops recording (above 40 knt GS it will start again) 

FS9: you can now load a FS9 flightplan

Current altitude is changed in Analysis, above 2.000 feet AGL RW:  Feet is in MSL according aircraft altimeter, above 18.000 feet is MSL (29.92 inHg and 1013 hPa) 

When startingup FsQC sometimes Flight Analysis is also starting analyzing (Started in the air while on ground) , this is now solved

 

How FsQC deals with the flight:

If descent phase is established it's looking for the ILS frequencies and Runway, when the glideslope become alive it's searching for the specific runway, when runway is found the glideslope is drawn, when not found before 1100 feet above Runway Height the glideslope will not be drawn.
When 3.3 Nm before the touchdown point the Landing Chart will be acitve.

When not found the glideslope, it's searching only for the Runway, when the runway is found the Landing Chart will be active when the distance to the runway is less then 3.3 Nm.

When not found the runway before 1000 feet runway height, the Landing Chart will also be active and when the Chart is not properly displayed it will be reprocessed after the Landing.

--

Free Flight:

When you want to fly a free flight, make a Flight Plan with destination the same as departure, don't fly to cruise altitude, when you want to land fly first to cruise altitude.
In MSFS 2020 you must make this Flight Plan in FsQC Flight Planner.

--

Landing challenge in MSFS:

Make a Flight Plan with destination the same as departure and set cruise Altitude to 0 feet

--

Failures:

When you start Failures in FsQC you don't have to go to cruise altitude when failure occur, descent phase starts when your descent rate is more then 400 ft/m. so you can land on departure airport.

--

FS2020:
The new MakeRwys v5.xx is now working with FS2020.
Download on www.fsuipc.com



see www.FsQC.eu for more information.
If you have a problem look first on www.fsqc.eu/faq.html
If you have questions please contact support@fsqc.eu



